Browse Proceedings by Technology/Industry Group

Design Engineering
• Volume 8: Seismic Engineering (PVP2009)
• Volume 8: 14th Design for Manufacturing and the Life Cycle Conference; 6th Symposium on International Design and Design Education; 21st International Conference on Design Theory and Methodology, Parts A and B (IDETC/CIE2009)
• Volume 7: Turbomachinery, Parts A and B (GT2009)
• Volume 7: Offshore Geotechnics; Petroleum Technology (OMAE2009)
• Volume 7: Engineering Education and Professional Development (IMECE2009)
• Volume 7: 33rd Mechanisms and Robotics Conference, Parts A and B (IDETC/CIE2009)
• Volume 6: Materials and Fabrication, Parts A and B (PVP2009)
• Volume 6: Emerging Technologies: Alternative Energy Systems; Energy Systems: Analysis, Thermodynamics and Sustainability (IMECE2009)
• Volume 6: ASME Power Transmission and Gearing Conference; 3rd International Conference on Micro- and Nanosystems; 11th International Conference on Advanced Vehicle and Tire Technologies (IDETC/CIE2009)
• Volume 5: Polar and Arctic Sciences and Technology; CFD and VIV (OMAE2009)
• Volume 5: High Pressure Technology; Nondestructive Evaluation Division; Student Paper Competition (PVP2009)
• Volume 5: Fuel Cycle and High and Low Level Waste Management and Decommissioning; Computational Fluid Dynamics (CFD), Neutronics Methods and Coupled Codes; Instrumentation and Control (ICONE17)
• Volume 5: Electronics and Photonics (IMECE2009)
• Volume 5: 35th Design Automation Conference, Parts A and B (IDETC/CIE2009)
• Volume 4: Fluid-Structure Interaction (PVP2009)
• Volume 4: Design and Manufacturing (IMECE2009)
• Volume 4: Codes, Standards, Licensing and Regulatory Issues; Student Paper Competition (ICONE17)
• Volume 4: 7th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, Parts A, B and C (IDETC/CIE2009)
• Volume 3: Pipeline and Riser Technology (OMAE2009)
• Volume 3: Design and Analysis (PVP2009)
• Volume 3: Combustion, Fire and Reacting Flow; Heat Transfer in Multiphase Systems; Heat Transfer in Transport Phenomena in Manufacturing and Materials Processing; Heat and Mass Transfer in Biotechnology; Low Temperature Heat Transfer; Environmental Heat (HT2009)
• Volume 3: Combustion Science and Engineering (IMECE2009)
• Volume 3: ASME/IEEE 2009 International Conference on Mechatronic and Embedded Systems and Applications; 20th Reliability, Stress Analysis, and Failure Prevention Conference (IDETC/CIE2009)
• Volume 2: Structural Integrity; Safety and Security; Advanced Applications of Nuclear Technology; Balance of Plant for Nuclear Applications (ICONE17)
• Volume 2: Multifunctional Materials; Enabling Technologies and Integrated System Design; Structural Health Monitoring/NDE; Bio-Inspired Smart Materials and Structures (SMASIS2009)
• Volume 2: Fora (FEDSM2009)
• Volume 2: Computer Applications/Technology and Bolted Joints (PVP2009)
• Volume 2: Biomedical and Biotechnology Engineering (IMECE2009)
• Volume 2: 29th Computers and Information in Engineering Conference, Parts A and B (IDETC/CIE2009)
• Volume 1: Symposia, Parts A, B and C (FEDSM2009)
• Volume 1: Plant Operations, Maintenance, Engineering, Modifications and Life Cycle; Component Reliability and Materials Issues; Next Generation Systems (ICONE17)
• Volume 1: Offshore Technology (OMAE2009)
• Volume 1: Codes and Standards (PVP2009)
• Volume 1: Active Materials, Mechanics and Behavior; Modeling, Simulation and Control (SMASIS2009)
• Volume 1: 22nd Biennial Conference on Mechanical Vibration and Noise, Parts A and B (IDETC/CIE2009)
• Volume 15: Sound, Vibration and Design (IMECE2009)
• Volume 13: New Developments in Simulation Methods and Software for Engineering Applications; Safety Engineering, Risk Analysis and Reliability Methods; Transportation Systems (IMECE2009)
• Volume 12: Micro and Nano Systems, Parts A and B (IMECE2009)
• Volume 11: Mechanics of Solids, Structures and Fluids (IMECE2009)
• Volume 10: Mechanical Systems and Control, Parts A and B (IMECE2009)
• ASME-AFM 2009 World Conference on Innovative Virtual Reality (WINVR2009)
• ASME 2009 Internal Combustion Engine Division Spring Technical Conference (ICES2009)
• ASME 2009 Internal Combustion Engine Division Fall Technical Conference (ICEF2009)
• ASME 2009 7th International Conference on Fuel Cell Science, Engineering and Technology (FUELCELL2009)
• ASME 2009 4th Frontiers in Biomedical Devices (BIOMED2009)
• 2009 Joint Rail Conference (JRC2009)
• Volume 9: Engineering Education and Professional Development (IMECE2008)
• Volume 8: Energy Systems: Analysis, Thermodynamics and Sustainability; Sustainable Products and Processes (IMECE2008)
• Volume 6: Turbomachinery, Parts A, B, and C (GT2008)
• Volume 5: Design, Analysis, Control and Diagnosis of Fluid Power Systems (IMECE2008)
• Volume 5: 13th Design for Manufacturability and the Lifecycle Conference; 5th Symposium on International Design and Design Education; 10th International Conference on Advanced Vehicle and Tire Technologies (IDETC/CIE2008)
• Volume 4: Structural Integrity; Next Generation Systems; Safety and Security; Low Level Waste Management and Decommissioning; Near Term Deployment: Plant Designs, Licensing, Construction, Workforce and Public Acceptance (ICONE16)
• Volume 4: Design and Manufacturing (IMECE2008)
• Volume 4: 20th International Conference on Design Theory and Methodology; Second International Conference on Micro- and Nanosystems (IDETC/CIE2008)
• Volume 3: Design; Tribology; Education (ESDA2008)
• Volume 3: Design and Analysis (PVP2008)
• Volume 3: 28th Computers and Information in Engineering Conference, Parts A and B (IDETC/CIE2008)
• Volume 2: Computer Applications/Technology and Bolted Joints (PVP2008)
• Volume 2: 32nd Mechanisms and Robotics Conference, Parts A and B (IDETC/CIE2008)
• Volume 1: Offshore Technology (OMAE2008)
• Volume 1: 34th Design Automation Conference, Parts A and B (IDETC/CIE2008)
• Volume 14: New Developments in Simulation Methods and Software for Engineering Applications (IMECE2008)
• Volume 13: Nano-Manufacturing Technology; and Micro and Nano Systems, Parts A and B (IMECE2008)
• Smart Materials, Adaptive Structures and Intelligent Systems, Volume 2 (SMASIS2008)
• Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1 (SMASIS2008)
• STLE/ASME 2008 International Joint Tribology Conference (IJTC2008)
• IEEE/ASME/ASCE 2008 Joint Rail Conference (JRC2008)
• Fourth International Topical Meeting on High Temperature Reactor Technology, Volume 2 (HTR2008)
• Fourth International Topical Meeting on High Temperature Reactor Technology, Volume 1 (HTR2008)
• ASME 2008 Internal Combustion Engine Division Spring Technical Conference (ICES2008)
• ASME 2008 2nd Multifunctional Nanocomposites and Nanomaterials (MN2008)
• 2008 Second International Conference on Integration and Commercialization of Micro and Nanosystems (MICRONANO2008)
• Volume 9: Mechanical Systems and Control, Parts A, B, and C (IMECE2007)
• Volume 9: Eighth International Conference on Creep and Fatigue at Elevated Temperatures (PVP2007)
• Volume 8: 31st Mechanisms and Robotics Conference, Parts A and B (IDETC/CIE2007)
• Volume 7: 10th International Power Transmission and Gearing Conference (IDETC/CIE2007)
• Volume 6: 33rd Design Automation Conference, Parts A and B (IDETC/CIE2007)
• Volume 5: High-Pressure Technology; Non-Destructive Evaluation; Student Paper Competition (PVP2007)
• Volume 5: 6th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, Parts A, B, and C (IDETC/CIE2007)
• Volume 4: Design, Analysis, Control and Diagnosis of Fluid Power Systems (IMECE2007)
• Volume 4: ASME/IEEE International Conference on Mechatronic and Embedded Systems and Applications and the 19th Reliability, Stress Analysis, and Failure Prevention Conference (IDETC/CIE2007)
• Volume 3: Design and Manufacturing (IMECE2007)
• Volume 3: Design and Analysis (PVP2007)
• Volume 3: 19th International Conference on Design Theory and Methodology; 1st International Conference on Micro- and Nanosystems; and 9th International Conference on Advanced Vehicle Tire Technologies, Parts A and B (IDETC/CIE2007)
• Volume 2: 27th Computers and Information in Engineering Conference, Parts A and B (IDETC/CIE2007)
• Volume 1: 21st Biennial Conference on Mechanical Vibration and Noise, Parts A, B, and C (IDETC/CIE2007)
• Volume 12: New Developments in Simulation Methods and Software for Engineering Applications (IMECE2007)
• Volume 11: Micro and Nano Systems, Parts A and B (IMECE2007)
• ASME 2007 Internal Combustion Engine Division Fall Technical Conference (ICEF2007)
• ASME 2007 2nd Frontiers in Biomedical Devices (BIOMED2007)
• Volume 6: Turbomachinery, Parts A and B (GT2006)
• Volume 4c: 3rd Symposium on International Design and Design Education (IDETC/CIE2006)
• Volume 4b: 11th Design for Manufacturing and the Lifecycle Conference (IDETC/CIE2006)
• Volume 4a: 18th International Conference on Design Theory and Methodology (IDETC/CIE2006)
• Volume 4: Fatigue and Fracture, Heat Transfer, Internal Combustion Engines, Manufacturing, and Technology and Society (ESDA2006)
• Volume 3: Dynamic Systems and Controls, Symposium on Design and Analysis of Advanced Structures, and Tribology (ESDA2006)
• Volume 3: 26th Computers and Information in Engineering Conference (IDETC/CIE2006)
• Volume 2: Automotive Systems, Bioengineering and Biomedical Technology, Fluids Engineering, Maintenance Engineering and Non-Destructive Evaluation, and Nanotechnology (ESDA2006)
• Volume 2: 30th Annual Mechanisms and Robotics Conference, Parts A and B (IDETC/CIE2006)
• Volume 1: Advanced Energy Systems, Advanced Materials, Aerospace, Automation and Robotics, Noise Control and Acoustics, and Systems Engineering (ESDA2006)
• Volume 1: 32nd Design Automation Conference, Parts A and B (IDETC/CIE2006)
• Multifunctional Nanocomposites (MN2006)
• Design Engineering and Computers and Information in Engineering, Parts A and B (IMECE2006)
• ASME 2006 Power Conference (POWER2006)
• ASME 2006 Frontiers in Biomedical Devices Conference (NANOBIO2006)
• Volume 7: 29th Mechanisms and Robotics Conference, Parts A and B (IDETC/CIE2005)
• Volume 6: Turbo Expo 2005, Parts A and B (GT2005)
• Volume 6: 5th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, Parts A, B, and C (IDETC/CIE2005)
• Volume 5b: Power Transmission and Gearing Conference (IDETC/CIE2005)
• Volume 5a: 17th International Conference on Design Theory and Methodology (IDETC/CIE2005)
• Volume 4c: 18th Reliability, Stress Analysis, and Failure Prevention Conference (IDETC/CIE2005)
• Volume 4b: Design for Manufacturing and the Life Cycle Conference (IDETC/CIE2005)
• Volume 4a: ASME/IEEE Conference on Mechatronic and Embedded Systems and Applications (IDETC/CIE2005)
• Volume 3: 25th Computers and Information in Engineering Conference, Parts A and B (IDETC/CIE2005)
• Volume 2: 31st Design Automation Conference, Parts A and B (IDETC/CIE2005)
• Volume 1: 20th Biennial Conference on Mechanical Vibration and Noise, Parts A, B, and C (IDETC/CIE2005)
• Design, Synthesis, and Applications (NANO2005)
• Design Engineering, Parts A and B (IMECE2005)
• ASME 2005 Power Conference (POWER2005)
• Volume 5: Turbo Expo 2004, Parts A and B (GT2004)
• Volume 4: 24th Computers and Information in Engineering Conference (IDETC/CIE2004)
• Volume 3d: 8th Design for Manufacturing Conference (IDETC/CIE2004)
• Volume 3c: Integration of Materials Microstructure and Chemistry in Multidisciplinary Design Optimization (IDETC/CIE2004)
• Volume 3b: 2nd Symposium on International Issues in Engineering Design (IDETC/CIE2004)
• Volume 3a: 16th International Conference on Design Theory and Methodology (IDETC/CIE2004)
• Volume 3 (ESDA2004)
• Volume 2: 28th Biennial Mechanisms and Robotics Conference, Parts A and B (IDETC/CIE2004)
• Volume 2 (ESDA2004)
• Volume 1: 30th Design Automation Conference (IDETC/CIE2004)
• Volume 1 (ESDA2004)
• Elevated Temperature Design and Analysis, Nonlinear Analysis, and Plastic Components (PVP2004)
• Design, Synthesis, and Applications (NANO2004)
• Design Engineering (IMECE2004)
• ASME 2004 Power Conference (POWER2004)
• 2004 International Pipeline Conference, Volumes 1, 2, and 3 (IPC2004)
• Volume 5: 19th Biennial Conference on Mechanical Vibration and Noise, Parts A, B, and C (IDETC/CIE2003)
• Volume 4: 9th International Power Transmission and Gearing Conference, Parts A and B (IDETC/CIE2003)
• Volume 3d: Safety Engineering and Risk Analysis (IDETC/CIE2003)
• Volume 3c: 17th Reliability, Stress Analysis and Failure Prevention Conference (IDETC/CIE2003)
• Volume 3b: 15th International Conference on Design Theory and Methodology (IDETC/CIE2003)
• Volume 3a: 8th Design for Manufacturing Conference (IDETC/CIE2003)
• Volume 2: 29th Design Automation Conference, Parts A and B (IDETC/CIE2003)
• Volume 1: 23rd Computers and Information in Engineering Conference, Parts A and B (IDETC/CIE2003)
• Microelectromechanical Systems (IMECE2003)
• Manufacturing (IMECE2003)
• Design Engineering, Volumes 1 and 2 (IMECE2003)
• 2003 International Joint Power Generation Conference (IJPGC2003)
• Volume 5: Turbo Expo 2002, Parts A and B (GT2002)
• Volume 5: 27th Biennial Mechanisms and Robotics Conference (IDETC/CIE2002)
• Volume 4: Turbo Expo 2002, Parts A and B (GT2002)
• Volume 4: 14th International Conference on Design Theory and Methodology, Integrated Systems Design, and Engineering Design and Culture (IDETC/CIE2002)
• Volume 3: Turbo Expo 2002, Parts A and B (GT2002)
• Volume 3: 7th Design for Manufacturing Conference (IDETC/CIE2002)
• Volume 2: Turbo Expo 2002, Parts A and B (GT2002)
• Volume 2: 28th Design Automation Conference (IDETC/CIE2002)
• Volume 1: Turbo Expo 2002 (GT2002)
• Volume 1: 22nd Computers and Information in Engineering Conference (IDETC/CIE2002)
• Engineering Technology Conference on Energy, Parts A and B (ETCE2002)
• Design Engineering (IMECE2002)
• 2002 International Joint Power Generation Conference (IJPGC2002)